Troubleshooting Battery Changes
CHANGING THE BATTERY IN YOUR SOMFY REMOTE
1. Using a small screwdriver, loosen the screws on the reverse side of the remote control and remove the back cover.
2. Replace the battery with one 2430 Lithium 3V battery.
3. Replace the cover.
CHANGING THE BATTERY IN YOUR SOMFY MOTION SENSOR
1. Slide the housing off the base plate in the direction indicated by the arrow.
2. Use a small FLAT HEAD screw driver to remove the electronics from the housing.
3. Replace the batteries with comparable AAA size batteries.
If the sensor is working, you should see a light on the control board illuminate for about 1 second.
**PLEASE NOTE**
Make sure the batteries are facing the correct direction. Even though the housing springs for each battery are on the same end, the batteries must be inserted in opposite directions from each other.
Reassemble the sensor. Slide the housing onto the mounting plate until you hear a click.