fbpx

ADJUSTING THE SENSITIVITY OF YOUR SOMFY MOTION SENSOR

 

 

 

 

1. Slide the housing off the base plate in the direction indicated by the arrow.

 

 

 

 

 

2. Use a small FLAT HEAD screw driver to remove the electronics from the housing.

 

 

 

 

 

 

 

 

3. Use a small FLAT HEAD screw driver to adjust the sensitivity dial to the desired position.

1=the most sensitive
9=the least sensitive

We recommend that the sensitivity setting be set as low as possible in order to prevent wind damage. SugarHouse Industries is not responsible for wind damage caused by negligence.

Reassemble the sensor. Slide the housing onto the mounting plate until you hear a click.